E8 series photocells are specifically designed for 20 years operation, withstanding heat and weather conditions with a multi-volt operation.
E8 series photocells are specifically designed for 20 years operation, withstanding heat and weather conditions with a multi-volt operation. FR4 glass epoxy, which forms the primary insulating backbone of printed circuit boards, ensures higher levels of ON/OFF operation cycles.
Enclosure: Designed to meet ANSI C136.10.
Power Consumption: Less than 0.5 Watts (avg.) at 120VAC
Temperature Range: -40°F to 158°F (-40°C to +70°C) at 96% RH
Light Sensor: Non-drifting photo transistor
Relay Rating: 30 Amp general purpose relay.
Load Rating: 1000 Watt Tungsten, 1800 VA Ballast
Cover: High impact polypropylene with UV stabilized polycarbonate window
Base: High temperature polyester (PBT)
Connection: 3-pole locking type with solid brass blades
Gasket: Cross-linked polyethylene
| Model | AMI-E8-102-BL-XXX (IR) | AMI-E8F-102-BL-XXX (IR) |
| Rated Volts (VAC) | 120/208/240/277 | 120/208/240/277 |
| Voltage Range (Volts) | 105-305 | 105-305 |
IR - Denotes IR Filtered Phototransistor
XXX - Denotes Optional Customer Number
| Voltage Range | Frequency | ON/OFF Ratio | Time Delay ON/OFF | Operating Light Levels | Fail Mode | Surge Protection |
| 105-305 VAC | 50/60Hz | 1.5:1 | Instant ON, 2-5 second delay OFF | Standard 1.5 Fc ON (optional 1-3 Fc) | E8: ON E8F: OFF | 300J / 20kA |
1741 Industrial Drive, No 14
Sterling, IL 61081
© Copyright 2021 Altran Magnetics, Inc. All Rights Reserved.
Design & Development by 
Cork Tree Creative.
